Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Tighten
Tighten the outer tie rod nut to 49 Nm (36 ft. lbs.). Align the cotter pin slot by tightening the outer tie rod nut up to 1/6 additional turn, or 70 Nm
(52 ft. lbs.) maximum. Do not back off the outer tie rod nut for the cotter pin insertion.
4. Install the cotter pin into the hole in the tie rod stud.
Important: Be sure the rack and pinion boot is not twisted or puckered during toe adjustment.
5. Adjust the front toe. Refer to MEASURING WHEEL ALIGNMENT in WHEEL ALIGNMENT.
Tighten
Tighten the jam nut against the outer tie rod to 56 Nm (41 ft. lbs.).
