Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
13. Install the following components:
^
The suspension support brace (5)
^
The two suspension support brace nuts (4, 6)
Tighten
Tighten the nuts to 69 Nm (51 ft. lbs.).
14. Install the tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in TIRES AND WHEELS.
15. Lower the vehicle.
16. Raise the vehicle on a drive-on lift or move the vehicle to an alignment rack. The weight of the vehicle must be supported by the vehicle's tires and
wheels.
17. Stabilize the suspension by lifting up and pushing down the front bumper.
18. Torque the two bolts (1, 2).
