Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.
3. Install the disc brake shield. Secure with three bolts.
Tighten
Tighten the bolts to 8.3 Nm (74 inch lbs.).
4. Install the brake rotor. Refer to BRAKE ROTOR REPLACEMENT in DISC BRAKES.
5. Install the brake caliper assembly to the steering knuckle. Secure the brake caliper assembly with two brake caliper mounting bolts.
Tighten
Tighten the bolts to 88 Nm (65 ft. lbs.).
6. Install the tire and wheel assembly to the vehicle. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in TIRES AND WHEELS.
7. Lower the vehicle.
8. Fill the brake master cylinder reservoir. Refer to MASTER CYLINDER RESERVOIR FILLING in HYDRAULIC BRAKES.
