Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
9. Remove the tripot joint (2) from the wheel drive shaft (1).
10. Remove the inner boot (1) from the wheel drive shaft (2).
11. Remove the inner joint housing seal using the J 22912-01 (1) and a press.
12. Clean the inner boot and the tripot joint with a clean, dry, solvent free cloth.
13. Inspect the inner boot for tears, damage or fatigue. Replace as necessary.
14. Inspect the tripot joint for excessive wear or damage. If any excessive wear, damage, or abnormality is found, replace the tripot joint as an
assembly.
15. Inspect the dynamic dampener on the right wheel drive shaft for damage or distortion. Replace as necessary.
ASSEMBLY PROCEDURE
