Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.
3. Install the axle hub into position. Secure the hub with four bolts.
Tighten
Tighten the axle hub and rear suspension knuckle mounting bolts to 80 Nm (59 ft. lbs.).
4. Install the wheel speed sensor (if equipped). Secure the wheel speed sensor with the bolt.
Tighten
Tighten the wheel speed sensor bolt to 8.0 Nm (71 inch lbs.).
5. Install the brake drum. Refer to BRAKE DRUM REPLACEMENT in DRUM BRAKES.
6. Install the tire and wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in TIRES AND WHEELS.
7. Lower the vehicle.
