S10/T10 Blazer 4WD V6-262 4.3L (1989)
1.
Remove coil spring as outlined in COIL SPRING.
2.
Remove lower control arm pivot bolts, refer to COIL SPRING.
3.
Drive bushing flare down flush with rubber of front bushing, then remove front and rear bushings from control arm, Figs. 7 and 8.
4.
Install front bushing, Fig. 9, then flare the bushing, Fig. 10.
5.
Install rear bushings, Fig. 11, then the lower control arm as described previously.
