S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
-
Support the caliper with a piece of wire to prevent damage to the brake hose.
7. Caliper and rotor.
8. Brackets from upper control arm holding both the ABS wire and brake hose.
9. ABS bracket located on the top of the upper control arm ball joint.
10. Strap the frame to the hoist to prohibit movement.
11. Position a safety stand under the lower control arm.
NOTICE: Be careful that the safety stand does not damage or bend any components it may contact
12. Support the weight of the steering knuckle assembly and lower control arm with a safety stand.