S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
6. Drive axle washer and nut.
7. Drive axle nut.
-
Tighten bolts to 140 Nm (103 ft. lbs.).
8. ABS Bracket located on the top of the upper control arm ball joint.
9. Brackets from upper control arm holding both the ABS wire and brake hose.
10. Caliper and rotor.
11. Tires and wheel.
12. Remove safety stands.
13. Front differential carrier shield.
-
Tighten bolts to 25 Nm (19 ft. lbs.).