S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Wiper Arm: Service and Repair
Wiper Arm Replacement
Description
Remove or Disconnect
^
Mark the wiper park position on the windshield with a suitable non-permanent marker.
1. Cover from wiper arm assembly.
2. Arm assembly retaining nut.
3. Wiper arm assembly from the vehicle.
Install or Connect
1. Wiper arm assembly and retaining nut to the vehicle.
Tighten
^
Wiper arm retaining nut to 23 N.m 17 (lbs. ft.)
2. Wiper arm assembly cover.
Inspect Wiper Operation
^
Perform System Check.
