S10/T10 P/U 2WD L4-2.2L VIN 4 (1995)
-
Injector retainer bracket attaching screws to 3.5 Nm (31 lb. in.).
8. Accelerator cable bracket with attaching bolts/nuts.
Tighten
-
Accelerator cable bracket nut to 30 Nm (22 lb. ft.).
-
Accelerator cable bracket bolts to 25 Nm (18 lb. ft.).
9. Tighten fuel filler cap.
10. Negative battery terminal.
INSPECT
-
Turn ignition switch to the "ON" position for two seconds, then turn to the "OFF" position for ten seconds. Again turn to the "ON" position
and check for fuel leaks.
11. Air intake duct.