S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Rear Brake Caliper Components
DISASSEMBLE
1. Remove brake caliper.
CAUTION: Do not place fingers in front of the piston in an attempt to catch or protect it when applying compressed air. The piston can fly out with
force and could result in serious injury.
NOTE:
^
Use clean shop towels to pad the inside of the caliper housing during rear brake caliper piston removal.
^
To prevent damage be careful when handling rear brake caliper piston.
Removing Rear Brake Caliper Piston
2. Piston by directing dry, filtered compressed air into brake hose port of caliper housing.
^
Clean piston for scoring, nicks, corrosion and wear. Replace piston if necessary.