S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Door Switch: Service and Repair
Door Jamb Switch Replacement - Front
Remove or Disconnect
1. Negative battery cable.
2. Instrument panel sound insulator (Right side only).
3. Reach up and disconnect the electrical connector.
4. Door jamb switch from the vehicle.
^
Squeeze the locking tabs to release the switch.
Install or Connect
1. Door jamb switch to the vehicle.
^
Fully seat the locking tabs.
2. Electrical connector to the switch.
3. Instrument panel sound insulator. (Right side only).
4. Negative battery cable.
