S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Door Switch: Service and Repair
Door Jamb Switch Replacement - Rear
Remove or Disconnect
1. Negative battery cable.
2. Door jamb switch from the B-Pillar.
^
Use a flat-bladed tool to carefully pry at the base of the switch.
3. Electrical connector.
^
Tape the wires to the body to prevent them from dropping into the B-Pillar.
Install or Connect
1. Electrical connector.
2. Door jamb switch to the B-Pillar.
3. Negative battery cable.
