S10/T10 P/U 2WD V6-4.3L VIN W (1997)
7. Remove the bolt that retains the seat belt retractor assembly to the vehicle.
8. Remove the seat belt retractor assembly from the vehicle.
With Rear Side Doors
Installation Procedure
1. Install the seat belt retractor assembly to the rear side door.
2. Install the bolt that retains the seat belt retractor assembly to the rear side door.
Tighten
Tighten the seat belt retractor assembly bolt to 70 N.m (52 lb.ft.).
3. Guide the seat belt through the opening in the rear side door.
4. Install the rear side door trim panel.