S10/T10 P/U 2WD V6-4.3L VIN W (1997)
5. Install the seat belt opening trim cover.
6. Install the upper seat belt anchor plate and boll to the rear side door.
Tighten
Tighten the upper seat belt anchor plate bolt to 70 N.m (52 lb.ft.).
7. Close the upper seat belt anchor plate cover.
8. Install the lower seat belt anchor plate and bolt to the rear side door.
Tighten
Tighten the lower seat belt anchor plate bolt to 70 N.m (52 lb.ft.).
2 Door
Installation Procedure
1. Install the seat belt retractor assembly to the vehicle.