S10/T10 P/U 2WD V6-4.3L VIN W (1997)
INSTALLATION PROCEDURE
Starter Motor Replacement: Removal Procedure
1. Install the starter to the vehicle.
Starter Motor Replacement: Removal Procedure
2. Install the inboard starter mounting bolt. Do not tighten.
3. Install the starter shims to the vehicle, if equipped.
4. Install the outboard starter mounting bolt.
Tighten
Tighten the starter mounting bolts to 43 N.m (32 lb ft).
Starter Motor Replacement: Removal Procedure
5. Connect the wires to the solenoid.
6. Install the flywheel cover.
7. Connect the negative battery cable.
STARTER MOTOR REPLACEMENT (4.3L 4WD)