S10/T10 P/U 2WD V6-4.3L VIN W (1997)
REMOVAL PROCEDURE
Starter Motor Replacement: Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the engine mounts.
3. Raise the engine.
4. Support the engine.
5. Remove the transmission mount.
6. Support the transmission assembly.
7. Remove the starter mounting bolts. Rotate the starter for access.
Starter Motor Replacement: Removal Procedure
8. Remove the wires from the solenoid.
Starter Motor Replacement: Removal Procedure
9. Remove the starter from the vehicle. Note the location of the shims, if equipped.
INSTALLATION PROCEDURE