S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Starter Motor Replacement: Removal Procedure
1. Install the starter to the vehicle.
Starter Motor Replacement: Removal Procedure
2. Connect the wires to the solenoid.
Starter Motor Replacement: Removal Procedure
3. Install the inboard starter mounting bolt. Do not tighten.
4. Install the starter shims and the outboard starter mounting bolt.
Tighten
Tighten the starter mounting bolts to 43 N.m (32 lb ft).
5. Lower the engine assembly onto the mounts.
-
Connect the transmission mount.
-
Connect the engine mounts.
6. Connect the negative battery cable.