S10/T10 P/U 2WD V6-4.3L VIN W (1997)
1. Trim panel.
2. Water deflector(s) from the door.
^
Break the bond between the sealer and the door with a flat-blade tool.
Install or Connect
1. Water deflector(s) to the door.
^
Use strip caulking as a sealant between the deflector and the door if necessary.
2. Trim panel to the door.
Inside Door Handle
Front Door Inner Handle
Remove or Disconnect
Tool Required:
J 34940 Rivet Gun
1. Door trim panel.
2. Water deflector.
3. Inside door handle rod.
^
Drill out the rivets that secure the inside door handle to the door.
4. Inside door handle from the door.
Install or Connect
1. Inside door handle to the door.
3. Rivets that secure the inside door handle to the door.
4. Water deflector.
5. Door trim Panel.
Outside Door Handle