Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
1. Install the speaker mounting bracket.
Notice: Refer to Fastener Notice.
2. Install the bolts (2) retaining the speaker mounting bracket to the door, if removed.
Tighten the bolts to 6 N.m (53 lb in).
3. Install the speaker to the mounting bracket.
4. Connect the electrical connector to the speaker.
5. Install the screws (1) that retain the speaker to the mounting bracket.
Tighten the screws to 2 N.m (53 lb in).
6. Install the door trim panel.
7. Verify the component operation.
Radio Rear Side Door Speaker Replacement (Extended Cab)
Radio Rear Side Door Speaker Replacement (Extended Cab)
Removal Procedure
1. Remove the door trim panel.
2. Remove the speaker by pushing down on the retainer.
3. Disconnect the electrical connector.
Installation Procedure
1. Install the electrical connector.
2. Install the speaker by snapping the speaker into place.
3. Install the door trim panel.
4. Verify the component operation.
Rear Pillar Speaker Replacement
Rear Pillar Speaker Replacement
Removal Procedure
1. Remove the trim panel.