Spectrum L4-91.5 1.5L (1985)
Choke Plate: Adjustments
1.
Check choke valve in the third stage of the fast idle cam as follows:
a. Set choke valve to the full open position.
b. Slowly open throttle lever while lightly pushing choke valve in the closing direction. Set choke valve to the third stage of the fast idle cam.
c. Check choke valve clearance. Clearance should be .093 inch on 1985 models, or .086 inch on 1986 - 88 models. If clearance obtained is not
as specified, remove automatic choke attaching rivet and bend choke housing lever. After adjustment is completed, install choke cover
attaching rivet.