Suburban 4WD V8-5.3L (2008)
Cooling System Air Bleeder Pipe / Hose: Service and Repair
Coolant Air Bleed Hose Replacement
Coolant Air Bleed Hose Replacement
Removal Procedure
1. If necessary, remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (See: Engine/Intake Manifold/Service and
Repair) for the 4.8L, 5.3L, and 6.0L engines.
2. Position the coolant air bleed hose clamp at the throttle body.
3. Remove the coolant air bleed hose from the throttle body.
4. Position the hose clamp at the pipe.
5. Remove the coolant air bleed hose (1) from the pipe (2).
Installation Procedure
