chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Entertainment System Control Module > < SRS - DTC's B0083/B0084 After Impact Sensor Replacement
Page 2
background image

^

Refer to the table above for correct P/N to update the SDM Operating System and SDM System Calibration using SPS.

FOR BUMPER REPLACEMENT

^

When bumper bar replacement is required on any 2007 and 2008 vehicle, refer to the table for the correct P/N.

^

For vehicles built after 9/17/2007, replace the Inflatable Restraint Front End Sensor (EFS) with P/N 25896408 (2nd design).

^

Verify the SDM calibration P/N, which is dependent upon the RPO option and build date (see table).

If the vehicle comes in with the air bag deployed, all appropriate service protocols/bulletins need to be followed, including the ones above.

The table shows what part numbers and calibration are compatible with each other.

Disclaimer

Entertainment System Control Module > < SRS - DTC's B0083/B0084 After Impact Sensor Replacement