Tracker 2WD L4-2.0L VIN C (1999)
9. Remove the door trim panel (3) from the vehicle.
10. Remove the front side window switch from the door trim panel (3) by releasing the 4 plastic retaining tabs, as needed.
INSTALLATION PROCEDURE
1. Install the right front side window switch to the front side door trim panel (3), if removed. Ensure that the 4 plastic retaining tabs are fully engaged.
2. Connect the front side window switch electrical connector, if equipped.
3. Install the door trim panel (3) to the front side door. Ensure that the plastic retainers are fully engaged.
4. Install the front side door window regulator handle snap ring (1) to the front side door window regulator handle (2), if equipped.
5. Install the window regulator handle (2) to the door, if equipped.
6. Install the screw which secures the front side door pull handle (4).
7. Install the outside rearview mirror opening cover (2).
