Tracker 2WD L4-2.0L VIN C (1999)
Air Door Cable: Adjustments
HVAC System - Manual
Mode Control Cable Adjustment
1. Disconnect the mode control cable from the clip (2) and the door at the heater case.
2. Set the mode lever to the VENT position.
3. At the heater case, hold the door lever fully toward the rear end of the vehicle the cable to the clip.
4. Inspect the mode lever for smooth operation.
5. Ensure that the mode lever stops at the correct positions.
Temperature Control Cable Adjustment
1. Disconnect the temperature control cable (1) from the clip and door at the heater case.
2. Set the temperature lever to the coldest position.
3. At the heater case, hold the door lever fully towards the rear end of the vehicle and install the cable to the clip.
4. Inspect the temperature lever for smooth operation.
5. Ensure that the temperature lever stops at the correct positions.
Vent Control Cable Adjustment
