Tracker 2WD L4-2.0L VIN C (1999)
1. Lightly grease the gear shaft with Lubriplate lubricant GM P/N 1050109, or the equivalent.
2. Install the internal gear to the gear shaft (3).
3. Install the overrunning clutch assembly and the overrunning clutch stop ring to the gear shaft assembly.
4. Install the overrunning clutch retaining ring to the gear shaft assembly. Slide the overrunning clutch stop ring (4) away from the overrunning clutch
assembly to cover the overrunning clutch retaining ring (2).
5. Lightly grease the-pinion drive lever contact points with Lubriplate lubricant GM P/N 1050109, or the equivalent.
6. Install the gear shaft assembly with the pinion drive lever (4) to the drive housing (1).
7. Install the pinion drive lever seal (3) and the plate (4) to the drive housing (1).