Tracker 4WD L4-1.6L VIN 6 (1998)
Brake Caliper: Service and Repair
Brake Caliper Bracket Replacement
REMOVAL PROCEDURE
1. Remove the linings.
2. Remove two mounting bolts and the caliper carrier (2) from the vehicle.
3. Remove two caliper pins, with the boots, from the caliper carrier.
INSTALLATION PROCEDURE
1. Install two caliper pins, with boots, to the caliper carrier (2).
2. Install the caliper carrier (2) to the vehicle.
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that
application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.
3. Secure the caliper carrier with two mounting bolts.
^
Tighten the caliper carrier mounting bolts to 88 Nm (65 ft. lbs.).
4. Install the linings.