Tracker 4WD L4-1.6L VIN 6 (1998)
Brake Caliper: Service and Repair
Repair Instructions
Brake Caliper Replacement
REMOVAL PROCEDURE
1. Siphon two-thirds of the fluid from the master cylinder reservoir.
2. Raise the vehicle. Support the vehicle.
3. Remove the tire and wheel assembly.
4. Position the C-clamp around the outer pad (2) and the caliper.
5. Tighten the clamp until the piston (11) bottoms in its bore.
6. Remove the brake hose union bolt. Place a container beneath the brake hose to catch escaping brake fluid. Discard the two union fitting washers.