Tracker 4WD L4-1.6L VIN 6 (1998)
8.2.Insert two flat-bladed screwdrivers into the plug hole (3).
8.3.Push up the pawl lever (1) with one screwdriver. At the same time, turn the adjuster (2) with the other screwdriver in order to obtain enough
shoe-to-drum clearance.
9. Inspect all drum brake components for wear, distortion, cracks, or other abnormal conditions and replace them as necessary.
10. Measure the brake drum inner diameter (1) using a J21177-A
-
2-Door: 222 mm (8.74 in)
-
4-Door: 256 mm (10.07 in)
INSTALLATION PROCEDURE
1. Before installing the drum, check and adjust (if necessary) the outer diameter of the brake shoes (3) by using J21177-A
-
2-Door: 219.4 mm (8.64 in)
-
2-Door: 253.5 mm (9.98 in)