Tracker 4WD L4-1.6L VIN 6 (1998)
2. Install the brake drum (1) to the rear brake assembly. Verify that the drum is free of dirt and oil.
3. Install the locking washers (2) to the wheel studs.
4. Install the tire/wheel assembly.
5. Lower the vehicle.
6. Press the brake pedal three to ten times with about 30 kg (66 lb) in order to obtain the proper drum-to-shoe clearance.
7. Adjust the parking brake.
8. Install the parking brake lever bezel. Secure the bezel with the two screws.
