Tracker 4WD L4-1.6L VIN 6 (1998)
7. Disassemble the load sensing spring (2) and spring bracket from the LSPV lever (3).
INSTALLATION PROCEDURE
NOTICE: Do not loosen or tighten LSPV assembly nuts and bolts. The LSPV is not serviceable and must be replaced as a unit. Do not attempt to
disassemble the LSPV.
1. Assemble the load sensing spring (2) and spring bracket to the LSPV lever (3).
2. Apply a chassis lubricant, or equivalent, to the load sensing spring upper (1) and lower (1) joints.
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that
application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.