Tracker 4WD L4-1.6L VIN 6 (1998)
Thermostat: Service and Repair
REMOVAL PROCEDURE
1. Remove the radiator cap.
2. Open the drain plug (3) and the drain coolant to a level below the thermostat.
3. Close the drain plug (3).
4. Remove two bolts and the thermostat cap (3) from the intake manifold.
5. Remove the thermostat (1) and the gasket from the thermostat housing.
6. Clean any gasket material, corrosion or debris from the thermostat cap.
7. Clean the intake manifold mating surfaces.
8. Inspect the thermostat.
INSTALLATION PROCEDURE
IMPORTANT: Position the air bleed valve (2) toward the front of the vehicle.
1. Install the thermostat (1).