Tracker 4WD L4-1.6L VIN 6 (1998)
2. Install a new thermostat gasket.
3. Install the thermostat cap (3) to the intake manifold.
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Secure the thermostat cap (3) with two bolts.
^
Tighten the thermostat cap bolts to 16 Nm (12 ft. lbs.).
5. Fill the radiator with approved coolant.
6. Start the engine.
7. Allow the coolant to attain operating temperature (both hoses feel warm and the coolant is flowing through the radiator).
8. Check for leaks in the cooling system.
9. Shut off the engine.
10. Install the radiator cap.
