Tracker 4WD L4-1.6L VIN 6 (1998)
60. Remove six bolts and the cylinder head cover (1) from the cylinder head (2).
61. Remove the cylinder head cover gasket and the O-rings from the cylinder head cover.
IMPORTANT: A small amount of oil may drain from the distributor case upon removal from the cylinder head. Place a suitable container
underneath the distributor case or use a shop towel to catch and absorb oil.
62. Remove three bolts and the distributor case (1) from the cylinder head.
63. Loosen all of the valve adjusting screw locknuts (3).
64. Loosen all of the valve adjusting screws (2) until all the rocker arms (1) move freely.
NOTICE: Always loosen the camshaft carrier bolts gradually and in the order shown, in order to relieve tension on the camshaft. If the camshaft
carrier bolts are removed at random, damage to the camshaft may occur.
