Tracker 4WD L4-1.6L VIN 6 (1998)
69. Install the accelerator cable bracket (2) to the throttle body. Secure the cable bracket with one screw, one bolt and one nut.
^
Tighten the throttle body nut and bolt to 23 Nm (17 ft. lbs.).
70. install the accelerator cable (3) and the kickdown cable (4) (automatic transmission equipped vehicles) to the throttle body bellcrank (1).
71. Adjust the accelerator as necessary.
72. Adjust the kickdown cable (automatic transmission equipped vehicles) as necessary.
73. Install the throttle cover from the intake manifold.
74. Secure the throttle cover with three bolts
^
Tighten the throttle cover bolts to 15 Nm (11 ft. lbs.).
75. Refill the cooling system as necessary.
76. Install the air intake pipe to the throttle body hose and the Air Cleaner (ACL) intake hose.
77. Install the negative battery cable.
