Tracker 4WD L4-1.6L VIN 6 (1998)
63. Install the fuel feed hose at the fuel feed hose union (1).
64. Install the coolant hoses to the fast idle air valve below the throttle body.
65. Install the IAC air hose to the IAC valve.
66. Install the coolant hose to the IAC valve.
67. Install the following vacuum hoses:
^
The EGR valve modulator
^
The EGR valve
^
The brake booster supply hose
^
The vacuum modulator supply hose (automatic transmission equipped vehicles)
^
The EVAP SP Valve
^
The intake manifold absolute pressure sensor hose
68. Install the following electrical connectors:
^
The engine ground wire (7) to intake the surge tank
^
The fuel injectors
^
The EGR solenoid vacuum valve (1)
^
The EGR by-pass vacuum valve
^
The exhaust gas recirculation (EGR) temperature sensor
^
The evaporative emission solenoid purge (EVAP SP) valve.
^
The A/C ECT switch (3) (A/C equipped vehicles only)
^
The ECT sensor sending unit The engine coolant temperature (ECT) sensor (4)
^
The Idle Air Control (IAC) Valve
^
The Throttle Position (TP) Sensor
