Tracker 4WD L4-1.6L VIN 6 (1998)
54. Install the lower intake manifold support bracket (3) to the intake manifold. Secure the lower intake manifold support bracket with two bolts.
^
Tighten the lower intake manifold support bracket bolts to 50 Nm (37 ft. lbs.).
55. Install the rear intake manifold reinforcement bracket (1) to the intake manifold. Secure the rear intake manifold reinforcement bracket with two
bolts.
^
Tighten the rear intake manifold support bracket bolts to 50 Nm (37 ft. lbs.).
56. Install the front intake manifold reinforcement bracket (2) to the intake manifold. Secure the front intake manifold reinforcement bracket with two
bolts.
^
Tighten the front intake manifold support bracket bolts to 50 Nm (37 ft. lbs.).
57. Install the generator adjusting arm bracket (1) to the intake manifold. Secure the generator adjusting arm bracket with one bolt and one nut.
^
Tighten the generator adjusting arm bracket nut and bolt to 50 Nm (37 ft. lbs.).
58. Install the coolant bypass hose to the intake manifold.
59. Install the upper radiator hose to the thermostat housing.
60. Tighten the upper radiator hose clamp at the thermostat housing.
61. Install the PCV hose to the PCV valve.
62. Connect the fuel return hose to the fuel return line.
