Tracker 4WD L4-1.6L VIN 6 (1998)
49. Install the exhaust manifold bracket (1) to the exhaust manifold and engine block. Secure the exhaust manifold bracket (1) with one nut and two
bolts.
^
Tighten the mount-to-exhaust bracket bolts to 54 Nm (54 ft. lbs.).
^
Tighten the bracket-to-exhaust manifold nut to 50 Nm (37 ft. lbs.).
50. Lower the vehicle.
51. Install the upper exhaust manifold heat shield (3) to the exhaust manifold (2). Secure the upper exhaust manifold heat shield with two nuts and
three bolts
^
Tighten the upper exhaust manifold heat shield nuts and bolts to 10 Nm (89 inch lbs.).
52. Install the air intake pipe bracket to the cylinder head. Secure the air intake pipe bracket with three bolts.
^
Tighten the air intake pipe bracket bolts to 10 Nm (89 inch lbs.).
53. Install a new intake manifold gasket and intake manifold with the intake surge tank and throttle body to the cylinder head. Secure the intake
manifold gasket and intake manifold with the intake surge tank and throttle body with eight nuts and three bolts.
^
Tighten the intake manifold nuts and bolts to 23 Nm (17 ft. lbs.).
