Tracker 4WD L4-1.6L VIN 6 (1998)
45. Secure the new exhaust manifold gasket and the exhaust manifold with nine nuts (1).
^
Tighten the exhaust manifold nuts to 23 Nm (17 ft. lbs.).
46. Raise and support the vehicle.
47. Install the front pipe/TWC assembly (3) with the new gasket (2) to the exhaust manifold (1). Secure the front pipe/TWC assembly with three bolts
^
Tighten the exhaust manifold-to-front pipe/TWC assembly bolts to 50 Nm (37 ft. lbs.).
48. Install the lower exhaust manifold heat shield (6) to the exhaust manifold (2). Secure the lower exhaust manifold heat shield (6) with two bolts.
^
Tighten the lower exhaust manifold heat shield bolts to 10 Nm (89 inch lbs.).
