Tracker 4WD L4-1.6L VIN 6 (1998)
19. Remove the following from the intake manifold:
^
One bolt
^
One nut
^
The generator adjusting arm bracket (1)
20. Remove the two bolts and the front intake manifold reinforcement bracket (2) from the intake manifold.
21. Remove the two bolts and the rear intake manifold reinforcement bracket (1) from the intake manifold.
22. Remove the two bolts and the lower intake manifold support bracket (3) from the intake manifold.
23. Remove the following from the cylinder head:
^
Eight nuts
^
Three bolts
^
The intake manifold with the gasket
^
The intake surge tank
^
The throttle body
24. Remove the following from the intake manifold if required:
^
The PCV valve
^
The EGR valve
^
The ECT sensor (4)
^
The ECT sensor sending unit
