Tracker 4WD L4-1.6L VIN 6 (1998)
^
The A/C ECT switch (3) (A/C equipped vehicles)
^
The EGR temperature sensor
INSTALLATION PROCEDURE
1. Install the following to the intake manifold if required:
^
The PCV valve
^
The EGR valve
^
The ECT sensor (4)
^
The ECT sensor sending unit
^
The A/C ECT switch (3) (A/C equipped vehicles)
^
The EGR temperature sensor
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install a new intake manifold gasket (3) and the intake manifold (4) with intake surge tank (1) and throttle body (2) to the cylinder head. Secure
with eight nuts and three bolts.
^
Tighten the intake manifold nuts and bolts to 23 Nm (17 ft. lbs.).