Tracker 4WD L4-1.6L VIN 6 (1998)
1. Install the coolant pump (1) with a new gasket (2) to the engine. Secure the pump with five bolts.
^
Tighten the coolant pump bolts to 12 Nm (106 inch lbs.).
2. Install the rubber seals between the coolant pump and the oil pump.
3. Install the rubber seals between the coolant pump and the cylinder head.
4. Connect the engine oil level indicator tube to the engine. Secure the engine oil level indicator tube with a mounting bolt. Do not tighten fully.
^
Tighten the engine oil level indicator tube mounting bolt to 11 Nm (97 inch lbs.).
5. Install the timing belt tensioner and pulley.
6. Install the timing belt.
7. Install the crankshaft pulley (3). Secure the crankshaft pulley with five bolts.
^
Tighten the crankshaft pulley bolts to 16 Nm (12 ft. lbs.).
