Tracker 4WD L4-1.6L VIN 6 (1998)
8. Position the generator/coolant pump drive belt (2) on the pulley (1) before installing the coolant pump pulley (1).
9. Install the coolant pump pulley (1) to the coolant pump shaft.
IMPORTANT: The fan clutch, cooling fan and radiator shroud must be installed together because of insufficient clearance to install these parts
in separate steps.
10. Install the fan clutch, cooling fan and shroud together.
11. Secure the fan clutch (4), cooling fan (3) and shroud with the four fan clutch nuts and the four shroud bolts.
^
Tighten the fan clutch nuts to 11 Nm (97 inch lbs.).
^
Tighten the shroud bolts to 11 Nm (97 inch lbs.).
12. Adjust the air conditioner compressor drive belt (if equipped).
