Tracker 4WD L4-1.6L VIN 6 (1998)
1. Connect the muffler/tail pipe assembly (8-2 door), (7-4 door) to the vehicle. Secure the tail pipe with two hangers (6) (one bolt each). Finger
tighten the bolt.
Connect the muffler/tail pipe assembly, with a new gasket, to the front pipe/TWC assembly. Secure the assembly with two bolts and two nuts.
Finger tighten the bolts.
2. Connect the hanger to the muffler. Secure the hanger with one bolt. Finger tighten the bolt.
3. Connect the hanger to the pipe at the muffler. Secure the hanger with one bolt. Finger tighten the bolt.
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Align all system components properly to prevent any noise or vibrations before tightening fasteners.
^
Tighten TWC-to-muffler/tail pipe assembly bolts to 50 Nm (57 ft. lbs.).
^
Tighten all hanger bolts to 13 Nm (115 inch lbs.).
5. Lower the vehicle.
