Tracker 4WD L4-1.6L VIN 6 (1998)
1. Install the rear seat belt retractor mechanism (1) to the vehicle. Secure the mechanism with one screw and one bolt.
Tighten
Tighten the rear seat belt retractor mechanism bolt to 45 N.m (33 lb. ft).
Description
2. Install the rear seat belt retractor trim cover (2) to the vehicle. Secure the cover with one screw.
3. Press the rear door opening weatherstrip into place.
4. Remove the rear seat belt guide loop anchor bolt.
Tighten
Tighten the rear seat belt guide loop anchor bolt to 45 N.m (33 lb. ft).
5. Install the rear seat belt guide loop cover.
Description
6. Install the rubber stopper (3) to the rear seat belt retractor trim cover (2). Secure the stopper with two screws.
