Tracker 4WD L4-1.6L VIN 6 (1998)
Description
7. Install the rear seat belt lower anchor bolt (1).
8. Install the garnish moldings. Refer to Roof in Body and Accessories.
9. Install the folding top. Refer to Roof in Body and Accessories.
Tighten
Tighten the rear seat belt lower anchor bolt to 45 N.m (33 lb. ft).
10. Position the rear seat belt lower anchor bolt cover into place.
11. Clip the support rod to the bottom of the rear seat and lower the seat.
12. Raise the rear seatback into the upright position.
4 Door
NOTICE: Refer to Fastener Notice in Service Precautions.
Description
1. Install the rear seat belt retractor mechanism (1) to the vehicle. Secure the mechanism with one bolt.
Tighten
Tighten the rear seat belt retractor mechanism bolt to 45 N.m (33 lb. ft).
Description
2. Install the rear seat belt lower anchor bolt (12).
Tighten
Tighten the rear seat belt lower anchor bolt (12) to 45 N.m (33 lb. ft).
3. Install the Rear Seat Belt Retractor Trim Cover. Refer to Body Rear End in Body and Accessories.
4. Install the rear seat belt guide loop anchor bolt (1).
Tighten
Tighten the rear seat belt guide loop anchor bolt (1) to 45 N.m (33 lb. ft).
5. Install the rear seat belt guide loop cover (2).
