Tracker 4WD L4-1.6L VIN 6 (1998)
Description
6. Install the rear seat hinges (2) to the seat. Secure each hinge with one pin (1) and clip.
7. Install the rear seat to the vehicle. Secure the seat with one front anchor bolt to each rear seat hinge (2).
Tighten
Tighten the rear seat front anchor bolts to 25 N.m (19 lb. ft).
Description
8. Install the hinge cover (2) to each rear seat hinge (1).
9. Raise the rear seat and support it with the rear seat support rod.
10. Install one rear anchor bolt to each rear seat hinge.
Tighten
Tighten the rear seat rear anchor bolts to 25 N.m (19 lb. ft).
11. Clip the support rod to the bottom of the rear seat and lower the seat.
12. Raise the rear seatback into the upright position.
4 Door
