chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

On-Vehicle Service|Page 7787 > < On-Vehicle Service|Page 7785
Page 5
background image

Flow Control Valve Spring Measurement

^

Free length of the flow control valve spring using dial calipers. Free length of spring should fall within 30.5 mm - 33.5 mm (1.20 inch to 1.32
inch)
: If valve spring does not fall within specifications, replace the pump assembly.

INSPECT 

Pump Body And Shaft Inspection

Cam Ring Inspection

^

Pump body, cam ring, rotor, vanes and flow control valve for excessive wear.

^

Power steering pump body for cracks or leaks.

^

If excessive wear, cracks or leaks are present on pump body or any internal parts, the power steering pump must be replaced. 

INSTALL OR CONNECT 

Important 
^

Replace all old power steering pump O-ring seals with new ones from the power steering pump seal kit.

^

Lubricate internal parts with power steering gear and pump fluid Dexron III, or equivalent.

On-Vehicle Service|Page 7787 > < On-Vehicle Service|Page 7785