Tracker 4WD L4-1.6L VIN 6 (1998)
Fluid Filter - A/T: Service and Repair
REMOVAL PROCEDURE
1. Raise the vehicle. Support the vehicle.
2. Place an index mark (reference mark) (1) on the propeller shaft pinion flange and the front differential pinion flange of the transfer case to front
differential propeller shaft (four-wheel drive models).
IMPORTANT: Removal of the propeller shaft from the transfer case will result in fluid loss in four-wheel drive models.
3. Remove the four nuts and the four bolts from the front differential pinion flange (four-wheel drive models).
4. Separate the pinion flange yoke from the front differential pinion flange (four-wheel drive models).
5. Position and support the transfer case to the front differential propeller shaft away from the transmission fluid pan.
6. Place a drain pan or suitable container under the transmission drain plug (1).
7. Remove the drain plug in order to allow the transmission fluid pan (2) to drain.
