Tracker 4WD L4-1.6L VIN 6 (1998)
^
Reinsert the fluid level indicator into the filler tube.
^
Verify that the indicator is seated in the indicators original position.
^
Remove the fluid level indicator in order to inspect the fluid.
The fluid level should measure between the FULL HOT and LOW HOT marks.
^
If the level is below the LOW HOT mark then add fluid in order to raise the fluid level to the FULL HOT mark.
Raising the fluid level from the LOW HOT mark to the FULL HOT mark requires 0.3 liters (0.3 quarts) of fluid. Use Dexron (R) III automatic
transmission fluid GM P/N 12346143 or the equivalent.
^
Conduct a road test.
^
Inspect the transmission fluid level.